KDP formatting guide
KDP formatting is the set of print rules your interior PDF has to meet before Amazon will print it: margins that grow with page count, bleed for edge-to-edge art, embedded fonts, 300 DPI images and page numbers in order. This guide lists each rule from KDP Help, then shows how to meet them in InDesign, Word, Kindle Create and automatic tools.
By KDPBook Editorial · Updated · Checked against KDP Help
Key takeaways
- KDP formatting comes down to six checks: page size matches the trim (plus bleed if used), margins meet the page count minimum, fonts are embedded, images are at least 300 DPI, page numbers run in order, and no more than 4 blank pages sit in a row.
- The inside margin is 0.375 in for 24 to 150 pages and rises in steps to 0.875 in for 701 to 828 pages.
- Upload single pages, not spreads, with no crop marks and with transparent layers flattened.
- Kindle eBooks are a different file. Do not upload the print PDF as your eBook.
On this page
- Amazon KDP formatting guidelines for the interior file
- KDP formatting: margins and bleed
- KDP pictures and fonts
- KDP book format: front matter, headers and page numbers
- Common KDP formatting errors in the previewer
- How to make a book in InDesign for KDP
- How to make a PDF book for KDP
- Kindle Create: Amazon's Kindle book maker
- AI book formatting and automatic tools
- FAQ
This page covers KDP formatting for print books (paperback and hardcover). Start with the trim size, because every number below depends on it; our list of KDP book sizes has all of them with page limits. Then choose ink and paper, since paper changes the spine; see KDP paper types. Everything here is about the interior file. How Amazon prints and ships it is covered in KDP print on demand.
Amazon KDP formatting guidelines for the interior file
KDP's paperback submission guidelines are short and strict. These are the KDP formatting rules that most often decide whether a file goes through.
| Rule | What KDP asks for |
|---|---|
| File type | PDF if the book has bleed. Without bleed, PDF, DOC, DOCX, RTF, HTML or TXT |
| Page layout | Single pages, not spreads or 2-up files |
| Fonts | All fonts embedded |
| Minimum font size | 7 points |
| Images | At least 300 DPI |
| Layers | Transparent objects and layers flattened |
| Marks | No crop marks or trim marks |
| Page numbers | Sequential |
| Blank pages | No more than 4 in a row at the beginning or middle |
“All images (both cover and manuscript) should be at least 300 DPI.”
KDP formatting: margins and bleed
In KDP formatting, margins keep text out of the binding and away from the trim. The inside margin, also called the gutter, depends on page count, because a thicker book curves more into the spine.
| Page count | Inside (gutter) | Outside, top, bottom |
|---|---|---|
| 24 to 150 | 0.375 in | 0.25 in (0.375 in with bleed) |
| 151 to 300 | 0.5 in | 0.25 in (0.375 in with bleed) |
| 301 to 500 | 0.625 in | 0.25 in (0.375 in with bleed) |
| 501 to 700 | 0.75 in | 0.25 in (0.375 in with bleed) |
| 701 to 828 | 0.875 in | 0.25 in (0.375 in with bleed) |
Bleed is 0.125 in. If any image or color touches the page edge, set the whole interior up with bleed: the page becomes the trim plus 0.125 in wide and plus 0.25 in tall (a 6 x 9 book becomes 6.125 x 9.25 in). Extend bleed images past the trim line so nothing white shows after cutting. Text never bleeds; KDP says "all text should appear within the margins." A text-only novel should be set up without bleed.
KDP pictures and fonts
KDP pictures fail for one reason more than any other: they were too small to begin with. Insert each image at its original size or smaller, never stretched. A 300 DPI image printed at 6 in wide needs 1,800 pixels across. Turn off image compression in your layout program before you export, or it may quietly reduce the resolution. Photos and art taken from printed sources can show moiré patterns; scan at high resolution and avoid overlapping screen tones.
For fonts, KDP formatting means embedding every font in the PDF and keeping body text at 7 points or larger (most novels use 10 to 12 points as a matter of common practice). Use fonts that are licensed for commercial print. Text placed over images needs enough contrast to read.
KDP book format: front matter, headers and page numbers
KDP's help page on front, body and back matter describes the classic book order. KDP formatting does not require every element, but the ones you use should sit in this order and on the side KDP describes.
| Element | Page side | Headers and page numbers |
|---|---|---|
| Half title | Right | None |
| Title page | Right, directly after the half title | None |
| Copyright page | First left page after the title | None |
| Dedication | Right (common practice) | Only if longer than one page |
| Table of contents | Right | None |
| Preface, acknowledgments, introduction | Right (common practice) | Optional |
| Chapter one | Right | No header on the opening page |
- Headers: KDP's example puts the author name on left pages and the book title on right pages. Leave headers off chapter opening pages.
- Page numbers: body pages use Arabic numerals (1, 2, 3) and must run in sequence. Front matter can use Roman numerals.
- Restart at chapter one: add a section break after the front matter, unlink the header and footer from the previous section, and start numbering at 1.
- Blank pages: a blank left page before a right-hand chapter opening is normal. More than 4 blank pages in a row is not allowed.
- Back matter: the first section (about the author, an index) starts on a right page.
Common KDP formatting errors in the previewer
After upload, KDP's Print Previewer shows the book page by page and "also checks for errors you need to fix before submitting for publication." These are the flags that come up most, with the fix KDP gives for each.
| Flag | Usual cause | Fix |
|---|---|---|
| Content outside margins | Text box, stray space or image near the edge | Move it inside, or widen mirrored margins for the page count |
| Trim size mismatch | PDF page size differs from the trim or bleed setting | Reset the page size; add 0.125 in width and 0.25 in height for bleed |
| Low resolution image | Image enlarged or compressed | Replace with the original at 300 DPI or more |
| Fonts not embedded | PDF exported without embedding | Re-export with font embedding on |
| Excessive blank pages | More than 4 blank pages in a row | Delete the extra pages |
| Pagination error | Numbers skip or restart | Use section breaks and restart numbering at chapter one |
| Placeholder text | Template text left in | Find and replace it in body, headers and footers |
| Details mismatch | Title or author differs from book details | Match the interior, cover and KDP details |
How to make a book in InDesign for KDP
InDesign is the layout program most book designers use. The KDP setup is simple once you know where the numbers go.
- 1
New document with facing pages
Set the width and height to your trim (for example 6 x 9 in) and turn on Facing Pages. InDesign then treats left and right pages separately, so "Inside" margins land on the gutter.
- 2
Margins and bleed
Enter the inside margin for your expected page count and the outside, top and bottom margins. If the book bleeds, set bleed to 0.125 in on top, bottom and outside, and 0 on the inside.
- 3
Master pages and styles
Put running headers and page numbers on master pages. Use paragraph styles for body text and chapter titles so a change applies to every page.
- 4
Sections
Use Numbering and Section Options to number front matter in Roman numerals and restart Arabic numbers at chapter one.
- 5
Export
Export as PDF (Print) with a PDF/X-1a preset, which embeds fonts and flattens transparency. Export single pages, not spreads, and include bleed only if you set it. Leave crop marks off.
How to make a PDF book for KDP
Whatever you write in, the file KDP prints is a PDF. You can make a PDF book from Word, Google Docs, InDesign or a design app, as long as the final file meets the KDP formatting rules above. Before you upload, open the PDF in a reader and check three things: the page size in document properties equals your trim (or trim plus bleed), the font list shows every font as embedded, and the page count is the one you planned for the cover.
From Word, KDP's own instructions are to turn on "Embed fonts in the file" under File, Options, Save, and to check "Do not compress images in file" under the advanced options, then print to PDF with a PDF/X-1a or high-quality print preset. Our guide to Word book layout walks through the page setup, section breaks and headers step by step, and the manuscript template for KDP gives you a file with the size and margins already set.
Kindle Create: Amazon's Kindle book maker
Kindle Create is Amazon's own formatting app. Import a DOC or DOCX file and it becomes a reflowable eBook. Import a PDF and it becomes a Print Replica eBook, which keeps the print layout but does not let readers resize text. It exports KPF (the preferred format) and EPUB, though EPUB export is available only for reflowable books.
Kindle Create can also produce a print file for reflowable books at any KDP trim size. It suits text-heavy books with simple layouts. It is not built for picture books, coloring books or heavily designed pages, where you need full control of every page. KDP itself suggests Print Replica only when the content "absolutely requires maintaining exact print layout".
AI book formatting and automatic tools
Automatic formatters take a manuscript and set the trim, margins, headers and page numbers for you. They save hours on a text book, but they do not know your page count in advance, so check the gutter row once the layout settles. Whatever tool you use, the KDP formatting checks are the same: open the PDF, confirm size and fonts, and go through the KDP previewer page by page.
AI book formatting goes a step further when the same tool also writes and illustrates the book, because it knows the final page count before it builds the cover. That is how KDPBook works.
Frequently asked questions
What are the margins for a KDP book?
The inside margin depends on page count: 0.375 in for 24 to 150 pages, 0.5 in for 151 to 300, 0.625 in for 301 to 500, 0.75 in for 501 to 700 and 0.875 in for 701 to 828. Outside, top and bottom margins are at least 0.25 in, or 0.375 in with bleed.
What DPI does KDP require for images?
At least 300 DPI for both the interior and the cover. KDP suggests 600 DPI source images for manga and comics to avoid moiré.
Can I upload a Word file to KDP instead of a PDF?
For a print book without bleed, yes: KDP accepts DOC, DOCX, RTF, HTML and TXT. Books with bleed must be a PDF. A PDF is safer either way, because what you see is what prints.
How many blank pages are allowed in a KDP book?
No more than 4 consecutive blank pages at the beginning or middle of the manuscript. Single blank pages before right-hand chapter openings are fine.
What is the smallest font size KDP allows?
KDP's minimum font size is 7 points. Body text is usually much larger for comfortable reading.
Does the eBook need separate KDP formatting?
Yes. A print PDF is a fixed page; a Kindle eBook is usually a reflowable EPUB, Word or KPF file. KDP treats them as separate formats with separate files.
Why does KDP say my content is outside the margins?
Usually a text box, an image or a stray space sits past the margin line, or italic text leans over it. Move the content inside or widen the margins for your page count, then re-export.
Sources
- KDP Help: Set trim size, bleed, and margins
- KDP Help: Paperback submission guidelines
- KDP Help: Fix paperback and hardcover formatting issues
- KDP Help: Format front matter, body matter, and back matter
- KDP Help: Convert a paperback Word file to PDF
- KDP Help: Upload and preview book content
- KDP Help: Getting started with Kindle Create
- KDP Help: Comparing eBook formats