How to make a book in Word
Here is how to make a book in Word that a printer will accept: set the page to your trim size, mirror the margins, split the book into sections, number pages from chapter one, and export a PDF with every font embedded. The steps use Microsoft Word for Windows and Mac, with Amazon KDP's print numbers.
By KDPBook Editorial · Updated · Checked against KDP Help
Key takeaways
- To make a book in Word, set Layout, Size to your trim (for example 6 x 9 in), turn on Mirror margins with KDP's inside margin for your page count, use Heading 1 for chapters, add section breaks, then export a PDF with fonts embedded.
- KDP's inside margin is 0.375 in up to 150 pages and 0.5 in for 151 to 300 pages. Outside margins are at least 0.25 in.
- Use an Odd Page section break before chapter one so it starts on a right-hand page and page numbering can restart at 1.
- Turn off image compression and turn on font embedding before you make the PDF.
On this page
- Step 1: make the Word book page match your trim
- Step 2: mirror margins and the gutter
- Step 3: styles that make a Word book manageable
- Step 4: split the book with section breaks
- Step 5: different first page and odd/even headers
- Step 6: page numbers that start at chapter one
- Step 7: add images that print sharply
- Step 8: make a PDF of the Word book with fonts embedded
- FAQ
Word is not a layout program, but for a text book (a novel, memoir, poetry or nonfiction) it does the job well, and learning how to make a book in Word comes down to the eight steps below. Picture books and coloring books, where art fills the page, are easier in a design tool. If you want to skip the setup, start from our manuscript template for KDP, which has the page size and margins already in place, and use the steps below to understand what each setting does.
Step 1: make the Word book page match your trim
Go to Layout, Size, More Paper Sizes. Type the width and height of your trim, set Apply to: Whole document, and click OK. Common trims for text books are 5 x 8, 5.5 x 8.5 and 6 x 9 in; the full list with page limits is on our page of KDP book sizes.
If any page prints to the edge (a full-page photo, a colored background), the book needs bleed. Add 0.125 in to the width and 0.25 in to the height, so 6 x 9 becomes 6.125 x 9.25 in, and the whole book must be set up that way. A text-only book needs no bleed.
Step 2: mirror margins and the gutter
A printed book has left and right pages, and the inside edge of each one disappears into the binding. Word handles this with mirror margins. Go to Layout, Margins, Custom Margins. Under Pages, Multiple pages, choose Mirror margins. The Left and Right boxes become Inside and Outside.
| Page count | Inside | Outside, top, bottom |
|---|---|---|
| 24 to 150 | 0.375 in | 0.25 in |
| 151 to 300 | 0.5 in | 0.25 in |
| 301 to 500 | 0.625 in | 0.25 in |
| 501 to 700 | 0.75 in | 0.25 in |
| 701 to 828 | 0.875 in | 0.25 in |
Word also has a Gutter box, which adds extra space on top of the inside margin. The simplest approach is to type the full inside value in Inside and leave Gutter at 0, so the number you see is the number that prints. These are KDP's minimums; many designers give a novel more room, such as 0.75 in inside and 0.5 to 0.6 in outside, as a matter of taste. The full rule set is in our guide to KDP margins and bleed.
- Paper size
- 6 x 9 in
- KDP minimum inside
- 0.5 in (151 to 300 pages)
- KDP minimum outside, top, bottom
- 0.25 in
- Chosen settings
- Inside 0.75 in, outside 0.5 in, top 0.6 in, bottom 0.6 in, gutter 0
- Passes KDP minimum with room to spare
- Yes
Step 3: styles that make a Word book manageable
Styles are the backbone of a long document. Change a style once and every chapter updates. On the Home tab, right-click a style and choose Modify.
- Normal (body text): a book serif at 10.5 to 12 pt, justified, line spacing around 1.15 to 1.3, first-line indent about 0.25 to 0.3 in, spacing before and after 0. KDP's minimum font size is 7 pt.
- Heading 1 (chapter titles): larger, centered, with space above so the title sits lower on the page. Under Format, Paragraph, Line and Page Breaks, tick Page break before so every chapter starts on a new page.
- A "First paragraph" style: a copy of Normal with no indent, for the first paragraph after a chapter title or scene break.
Do not press Enter repeatedly to push text down or Tab to indent. Those manual fixes shift whenever anything changes and are the main reason Word books look uneven.
Step 4: split the book with section breaks
Sections let different parts of the book have different headers and page numbers. Put your cursor at the end of the front matter (title page, copyright, dedication, contents) and go to Layout, Breaks, Odd Page. Word starts the next section on a right-hand page and adds a blank left page if needed. That is where chapter one goes.
You can use further Odd Page breaks before each chapter if you want every chapter to open on the right, though it adds blank pages. KDP rejects more than 4 blank pages in a row at the beginning or middle of a book, so a single blank page before a chapter is fine.
Step 5: different first page and odd/even headers
- 1
Open the header
Double-click the top of a page in chapter one, or go to Insert, Header, Edit Header. The Header and Footer tab appears.
- 2
Unlink from the front matter
Click Link to Previous to turn it off, for both header and footer. Now the chapters can have headers and numbers while the front matter stays clean.
- 3
Turn on Different Odd and Even Pages
Type the author name in an even (left) page header and the book title in an odd (right) page header. This is the layout KDP's own formatting help describes.
- 4
Turn on Different First Page
Leave the first page of each section empty, so chapter opening pages have no running header.
Step 6: page numbers that start at chapter one
In the chapter one section, go to Insert, Page Number, pick a position in the footer (or the outer corner of the header), then choose Format Page Numbers and set Start at: 1. Because Different Odd and Even Pages is on, add the number to both an odd and an even page. If you want numbers on the front matter too, set that section's format to i, ii, iii.
Scroll through the whole book afterwards. KDP flags numbers that skip or restart in the wrong place. If a later section starts again at 1, open its Format Page Numbers and choose Continue from previous section.
For a table of contents, go to References, Table of Contents. Word builds it from your Heading 1 titles. Update it (right-click, Update Field, Update entire table) as the very last step before export so the page numbers are right.
Step 7: add images that print sharply
- Use Insert, Pictures, This Device with original files, not pasted screenshots. KDP asks for at least 300 DPI, so an image 4 in wide needs about 1,200 pixels across.
- Set Wrap Text to In Line with Text or Top and Bottom. Floating images move when text reflows.
- Under File, Options, Advanced, tick Do not compress images in file, as KDP's Word instructions advise.
- Keep images inside the margins unless the book is set up with bleed.
Step 8: make a PDF of the Word book with fonts embedded
KDP accepts a DOCX for print books without bleed, but a PDF is safer: what you see is what prints. Before you export, embed your fonts.
- 1
Embed fonts
Go to File, Options, Save and tick Embed fonts in the file. KDP says to leave "Embed only the characters used in the document" and "Do not embed common system fonts" unticked.
- 2
Make the PDF on Windows
KDP's instructions use the Adobe PDF printer with the PDF/X-1a preset (or High Quality Print or Press Quality), with "Use printer metrics to lay out document" ticked. KDP notes that printing to PDF keeps images at 300 PPI.
- 3
Make the PDF on Mac
Use File, Save As, choose PDF, and pick Best for printing rather than the electronic distribution option.
- 4
Check the PDF
Open it and confirm the page size matches your trim, every font shows as embedded, and the page count is what you expected. Then upload and go through KDP's previewer page by page.
With the interior done and the page count final, you can size the cover. The KDP cover calculator gives the full wrap size from your trim, paper and page count.
Frequently asked questions
Can you make a book in Microsoft Word?
Yes. For a text-based book, Word has everything needed for print: custom page size, mirror margins, section breaks, odd and even headers, page numbering and PDF export with embedded fonts.
Does Word have a book template?
Word has a Book Fold layout for printing booklets at home, but that is not what a printer like KDP needs. Use a single page per sheet at your trim size, or start from a KDP manuscript template.
What margins should I use in Word for a 6 x 9 book?
Turn on Mirror margins. KDP's minimum inside margin is 0.375 in up to 150 pages and 0.5 in for 151 to 300 pages, with at least 0.25 in outside, top and bottom. Many novels use more for comfort.
How do I start page numbers on chapter 1 in Word?
Add a section break before chapter one, turn off Link to Previous in its header and footer, then use Insert, Page Number, Format Page Numbers and set Start at 1.
Can I upload a Word document to KDP?
For a print book without bleed, KDP accepts DOC and DOCX, as well as PDF. Books with bleed must be uploaded as a PDF. For a Kindle eBook, Word files are one of KDP's suggested formats.
Why are my images blurry in the KDP preview?
Word compresses images by default. Tick Do not compress images in file under File, Options, Advanced, re-insert the originals, and make sure they are at least 300 DPI at the size they print.