How to make a book cover
To make a book cover that works in print and on Amazon, you need the right size first and the right design second. This guide walks through front and wrap covers, the spine math, type that reads at thumbnail size, images you are allowed to use, the barcode area and the export settings KDP expects.
By KDPBook Editorial · Updated · Checked against KDP Help
Key takeaways
- To make a book cover, size it from your trim, page count and paper, design the front to read at thumbnail size, add spine and back, leave the barcode area clear, and export a 300 DPI PDF.
- A paperback cover is one file: bleed, back, spine, front, bleed. A 6 x 9 in book with 200 cream pages needs a 12.75 x 9.25 in cover.
- Spine width is page count times a per-page number: 0.0025 in for cream, 0.002252 in for white, 0.002347 in for premium color.
- KDP only allows spine text on books of about 80 pages or more.
- The Kindle cover is a separate image. KDP recommends 2,560 x 1,600 px.
On this page
Make a book cover: front only or full wrap
An eBook needs only a front cover: one image that shows up on the Amazon page and in the reader's library. A paperback or hardcover needs a full wrap: the back cover, the spine and the front cover laid out side by side in one file, as if you unfolded the book flat. KDP wants this as a single PDF that includes the back cover, spine and front cover as one image.
When authors make a book cover, most design the front first, because it does most of the selling, then build the wrap around it once the interior is finished and the page count is fixed. Do not finalize the wrap before the interior. Adding ten pages changes the spine.
To see how finished wraps are laid out by genre, look through our KDP print cover examples.
Work out the cover size: trim, bleed and spine
KDP gives the formula directly. Cover width is bleed + back cover width + spine width + front cover width + bleed. Cover height is bleed + trim height + bleed. The bleed is 0.125 in (3.2 mm) on the top, bottom and outside edges.
| Paper and ink | Spine width per page |
|---|---|
| Black ink on white paper | 0.002252 in |
| Black ink on cream paper | 0.0025 in |
| Premium color on white | 0.002347 in |
| Standard color on white | 0.002252 in |
- Spine width
- 200 x 0.0025 = 0.5 in
- Width
- 0.125 + 6 + 0.5 + 6 + 0.125 = 12.75 in
- Height
- 0.125 + 9 + 0.125 = 9.25 in
- Pixels at 300 DPI
- 3,825 x 2,775 px
- Full cover size
- 12.75 x 9.25 in
The same book on white paper has a 0.45 in spine, so the cover is about 12.70 in wide. That small difference is why you should never reuse a cover file after changing paper or page count. The cover size calculator does this math for any trim and page count, and the KDP cover template gives you a guide file with the trim, spine and bleed lines already drawn. If you are still choosing the book's size, see KDP book sizes and white vs cream paper.
How to make a front cover for a book
Most buyers first see your cover as a small thumbnail in Amazon search results, next to a dozen others. So when you make a book cover, design for that size first. A cover that only works at full size will not get the click.
Typography that reads at thumbnail size
- Make the title big. It should be readable when the whole cover is about the size of a postage stamp. Shrink your design on screen and check.
- Use one or two typefaces. One for the title, one for the author name and subtitle. More than that looks busy.
- Get contrast right. Light type on a dark area or dark type on a light area. Avoid placing text over busy parts of the image.
- Keep the subtitle short. Long subtitles turn into gray noise at small sizes. Put the detail in the description instead.
- Check the hierarchy. Title first, image second, author name third. A well-known author can flip the last two.
Follow your genre conventions
Readers judge genre in a fraction of a second, and they do it from cover conventions. Thrillers lean on bold condensed type and dark, high-contrast images. Romance often shows a couple or bright illustrated type. Fantasy uses ornate type and big scenes. Nonfiction tends toward clean type and a simple idea. Children's books show the main character. Before you design, open the top 20 books in your category and note what they share. You want your cover to belong on that shelf and still be yours.
| Finish | KDP describes it as typical for |
|---|---|
| Glossy | Textbooks, children's books and nonfiction |
| Matte | Novels and other fiction |
Imagery: where it comes from and who owns it
Before you make a book cover, check that you have the right to use every image and font on it, for a product you sell. The main sources:
- Your own photos or art. Simplest for rights. Make sure the file is large enough for 300 DPI at the full cover size.
- Stock images. Read the license. Some licenses limit print runs or exclude products for resale, and the same photo may appear on other books.
- A hired designer or illustrator. Agree in writing that you can use the art on the cover, in ads and on all formats of the book.
- AI-generated images. Fast to iterate on, but KDP counts AI-generated images as AI-generated content, which you must disclose when you publish. See KDP AI content rules.
- Fonts. Free to download is not the same as free for commercial use. Check the font license covers book covers.
“We define AI-generated content as text, images, or translations created by an AI-based tool.”
Make your own book cover spine and back
Spine text is the title and author name running down the spine. KDP sets a page minimum for it: the cover guide gives 79 pages as the cutoff, and Cover Creator needs 80. A short book has a spine too thin to hold readable text, so leave it as a band of color.
“Your book must have at least 79 pages to add spine text.”
KDP also asks for at least 0.0625 in (1.6 mm) of space between spine text and the edge of the spine, and allows 0.0625 in of variance on either side of the fold. In practice, that means spine text should sit comfortably in the middle, never touching the folds.
The back cover holds a short description, sometimes an author photo or a line of praise, and the barcode. KDP places an ISBN barcode in a 2 x 1.2 in (50.8 x 30.5 mm) white box in the lower right corner of the back cover, and anything you put there is covered when it prints. Keep that area free of text and important art.
Export settings for print and Kindle
| Paperback cover | Kindle eBook cover | |
|---|---|---|
| File | One PDF: back, spine, front | Image, JPEG preferred |
| Size | Trim + spine + 0.125 in bleed | 2,560 x 1,600 px (height x width) |
| Resolution | Images at 300 DPI minimum | 300 DPI minimum |
| Content | Full wrap with barcode area clear | Front cover only, RGB recommended |
Export the print cover at its full size with bleed, and check the PDF page size matches the number from your calculator to two decimal places. Then look at the front at 10% zoom one last time. If you can read the title, you are done.
- 1
Finish the interior
Lock the trim, paper and page count first.
- 2
Calculate the size
Bleed, back, spine, front, bleed. Note the spine width.
- 3
Design the front
Big title, clear image, genre-appropriate type. Test at thumbnail size.
- 4
Build the wrap
Add the spine (from about 80 pages) and the back with the barcode area clear.
- 5
Export and check
A 300 DPI PDF for print and a 2,560 x 1,600 px JPEG for Kindle.
Make book covers without the math
If you make your book with KDPBook, the wrap cover comes with it. The AI book generator builds the back, spine and front with bleed, sized from your final page count and paper, with the barcode area kept clear, and a separate 1,600 x 2,560 px Kindle cover image. For picture books, the AI children's book generator uses the same approved characters on the cover as inside, and the coloring book maker sizes the cover for books with a blank back on every page.
Frequently asked questions
How do I make my own book cover for KDP?
Work out the full cover size from your trim, page count and paper, design the front to read at thumbnail size, add the spine and back, keep the barcode area clear, and upload one 300 DPI PDF that includes back, spine and front.
What size is a 6 x 9 book cover?
It depends on the page count and paper. With 200 pages of cream paper the spine is 0.5 in, so the full cover is 12.75 x 9.25 in including 0.125 in bleed on every outside edge.
How do I calculate spine width?
Multiply the page count by KDP's per-page number: 0.0025 in for cream, 0.002252 in for white, 0.002347 in for premium color. 300 white pages give a spine of about 0.676 in.
Can I put text on the spine of a thin book?
KDP requires at least 79 pages for spine text, and Cover Creator needs 80. Below that, leave the spine as a plain color.
What size should a Kindle cover be?
KDP recommends 2,560 px tall by 1,600 px wide, at least 300 DPI, as a JPEG in RGB.
Where does the barcode go on a book cover?
If you use KDP's barcode, it is placed in a 2 x 1.2 in white box in the lower right corner of the back cover. Keep text and important art out of that area.
Can I use AI images on my book cover?
Yes, but KDP counts them as AI-generated content, and you must disclose it when you publish. Make sure nothing on the cover copies another artist, brand or character.